Types Of Rivets And Their Uses

1. The fan rivet is specially designed for manual installation. It can be pulled in through the hole of the panel or the bottom frame. It is made of elastomer material and has good toughness. , Fan rivets are mainly used for fixing electronic computer case fans, heat sinks, and chips, with anti-vibration and noise reduction.

2. The core rivet is a new type of riveting fastener that is very convenient for riveting. The core rivet can show its unique advantages in a relatively small space or in an environment where there is no rivet gun or a rivet gun cannot be used. Two or more connected parts can be riveted successfully by hitting the mandrel on one side with a hammer or other utensils. Core rivets can be divided into oblate head core rivets and countersunk head core rivets according to the shape of the brim of the nail cap.

3. The types of rivets can be roughly divided into open type, closed type, double drum type and single drum type series.

4. Countersunk head blind rivets: riveting of riveting parts that require smooth and beautiful riveted surfaces.

5. Double-drum blind rivet: During riveting, the mandrel pulls the end of the rivet body into a double-drum shape, clamps the two structural parts to be riveted, and can reduce the pressure acting on the surface of the structural parts. Mainly used for riveting various thin structural parts in vehicles, ships, construction, machinery, electronics and other industries.

6. Brim blind rivet: Compared with ordinary blind rivets, the diameter of the aluminum cap of this rivet is significantly larger. When the rivet is riveted with the connector, it has a larger contact area and a stronger supporting surface, which can strengthen the Torque strength, and can withstand higher radial tension. Applicable industries: It is suitable for fastening soft and fragile surface materials and extra-large holes. The increased diameter of the brim has special protection applications for soft materials.

7. Closed blind rivet: It is specially designed for wrapping the mandrel head after riveting, which is very suitable for various applications with waterproof requirements. With high shear force, anti-vibration, and anti-high pressure.

8. All-aluminum blind rivet: The rivet body is also made of high-quality aluminum wire, which is beautiful and durable after riveting. It will never rust: compared with ordinary blind rivets, rivets have lower riveting strength and are suitable for softer materials.